tapered roller bearings

Contact Now

The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.The larger the half angles of these cones the larger the axial force that the bearing can sustain.

Bearing Number Bore Dia Outer DIa Width Size
KOYO 3994/3925 tapered roller bearings 0 Inch | 0Millimeter 0.0 0 Inch | 0 Millimete 12.1 Inch | 308.5 Mi
Toyana 93825/93125 tapered roller bearings 0.0 Mounted Units & 0.99 M06110
25 mm x 52 mm x 15 mm ISB 30205 tapered roller bearings 31171504 SKF 0.315 Inch | 8 Milli C3-Loose
50,8 mm x 82,55 mm x 22,225 mm FAG KLM104949-LM104911 tapered roller bearings 0 NTN 0.0 Bearings
80 mm x 140 mm x 33 mm ISB 32216 tapered roller bearings N/A Bearings 0 PEER BEARING CO.
60 mm x 95 mm x 27 mm NTN 33012 tapered roller bearings 0.0 1.998 N/A M06110
133,35 mm x 215,9 mm x 51 mm Gamet 200133X/ 200215X tapered roller bearings 0.0 AURORA BEARING 0 N/A
54,987 mm x 104,775 mm x 29,317 mm Timken 466/453X tapered roller bearings Bearings 0.0 PEER BEARING CO. M06110
50,8 mm x 107,95 mm x 36,957 mm FAG K537-532-X tapered roller bearings Thrust Ball Bearing B00308 Double Direction No
Toyana L281148/10 tapered roller bearings N/A B00308 C3-Loose Ball Bearing
21/21